However, there has always been the option of having a shower unit installed over a bath. This was achieved by using a shower curtain and rail system to deflect water back into the bath. Whilst this option is still used, the shower curtain was a messy affair, stuck your body when wet and did nothing for the look or style of your bathroom.
The previous types of screens generally work best in larger bathrooms because they can take up a lot of space and seem too big in a small area. For smaller bathrooms, you should consider a folding multi-panel screen. These can be pushed up and stored in a small area by your tub, or pulled out to cover the same space as a frameless screen. This way they only take up space when you’re using them.
Shower screens protect your bathroom floors from any kind of water damage. They are also nice additions to any bath space These products are definitely stylish and very functional. They are also quite easy to install, and are practically low maintenance. Screens for shower can be made of glass and usually comes in clear and opaque styles. Different patterns are also available to offer variety, such as etched and stained glass designs. With this in mind, it is time to let go of the traditional and very tacky shower curtains, which tend to accumulate stain, mold, and mildew over time.
Then came the option of a fixed glass bath screen. The screen was fitted to the wall and ran about 800mm along the top edge of the bath tub. This avoided the need for a curtain and the problems mentioned above. However, having a fixed glass screen permanently in place running half the length of your bath made getting in and out difficult. Bathing children was also made difficult, not to mention the hassle of cleaning! Today, there are a couple of great solutions for bathrooms can only have a bath rather than a shower enclosure.
The first step is to mount the wall channel into the wall, this part is crucial and must not be rushed. Take due care to get the channel flush with the wall and use a spirit level to check both vertical and horizontal levels. Apply some silicone sealant behind the channel to create a seal, do not use too much sealant as it will splay out and become unsightly. If some does push out of the joint, wipe it off with a damp cloth. Screw the channel to the wall using the correct size of screw and plug. Once firmly fixed to the wall offer up the door and then affix securely into the channel. If you correctly leveled the channel in the previous step then your door should now pivot correctly and form a seal along the edge of the bath. Most bath screens come with adjustment screws to allow for any small anomalies.